IPS has a range of staging modules that can be constructed in many different configurations to build whatever stage size required. Below are some examples of common sizes, but we can build pretty much any shape and height required. Staging can either be collected from our warehouse and set up yourself, or IPS can deliver and install, and then remove after your event.

Some popular sizes include:

Small Band Stage – 12’ x 8’ (3660mm x 2440mm) LiteDeck stage @ 2’ (610mm) high. Stage supplied with a rear handrail, and a single set of treads. Components would fit comfortably in a larger van (e.g. MWB Sprinter or LWB Transit). 

Medium Band Stage – 16 ’x 12’ (4880mm x 3660mm) LiteDeck stage @ 2’ (610mm) high. Stage supplied with a rear handrail, and two sets of treads. Components would fit in a larger van (e.g. MWB Sprinter or LWB Transit).

Larger Band Stage - 24’ x 16’ (7320mm x 4880mm) LiteDeck stage @ 3’ (915mm) high. Stage supplied with a rear and part sides handrail, and one set of treads. Components could be configured to fit in a long wheelbase van (e.g LWB Sprinter or Transit Jumbo).

IPS has a range of LiteDeck staging modules that can be built in many different configurations. From a simple platform at a conference to make sure that a presenter at a lectern can be seen by all the event delegates, to a creative multi-level structure, IPS can supply a stage to fit your requirements. Disabled access ramps, recessed comfort monitors, curved sections and many other features can be incorporated into the design, and a range of different finishes can be achieved. IPS can supply staging in various standard configurations, or you can send plans of specific requirements- or just explain what you are trying to achieve, and IPS can help to construct a stage to meet your needs.

Below are some example stage configurations:

Lectern Stage – 8’ x 6’ (2440mm x 1830mm) LiteDeck Stage @ 18” (457mm) High. Supplied complete with a 4’ wide (1220mm) two step tread unit, and a grey carpet finish, with felt covered fascia boards to cover the sides. Contact us for prices.

Presentation Stage – 20’ x 8’ (6100mm x 2440mm) LiteDeck Stage @ 18” (457mm) High. Supplied complete with two 4’ wide (1220mm) two step tread units, and a grey carpet finish, with felt covered fascia boards to cover the sides. Contact us for prices.

Awards Event Stage – 44’ x 6’-10’ (13467.5mm x 1830mm to 3050mm) LiteDeck Stage @ 1’ (Platform) & 2’ (Edges) High. Supplied with a central step, and then two custom curved steps up to the end platforms. Covered with cord carpet, and felt covered fascia boards- Ideal for awards presentations. Contact us for prices.

Tower structures offer an ideal solution where rigging equipment from a ceiling or roof structure is not an option. IPS can supply towers in a variety of configurations, depending on the required application. Towers can be as simple as a 4’x2’ LiteDeck platform at 4’ high to support a projector in a rear projection scenario - or a much higher braced structure to get over the heads of an audience for a front projection system. Towers can also be supplied with access treads/ladders and handrails to be suitable as a followspot position. Higher structures can be constructed using Layher components including trapdoors for internal ladder access, and integral bracing. Like all our stage structures, they can be supplied with a variety of different coverings such as covered scenic flats, or casement/drape coverings.

Some popular sizes include:

Small Rear Projection Platform – 4’x2’ (1220mm x 610mm) LiteDeck Platform @4’ high (1220mm) 

Front Projection Platform/Tower – 4’x4’ (1220mm x 1220mm) LiteDeck Platform @ 10’ high (3050mm) (this would usually require bracing and ballast). (Genie Superlifts can also be supplied to assist with getting equipment into position on platforms)

Followspot Platform/Tower – 2m x 2m (6’6” x 6’6”) Layher Platform @ 4m high (13’) including ladder access, handrails and all bracing.

Get in touch for a quotation for your event or show.